Description
Product details
⮚ DESIGN PARAMETERS WITH STANDARD SUPPLY: 1. Frame & body MS Powder coated, Double shaft 2. 7.5 HP Three phase motor 3. Auto Forward – Reverse available 4. Output Capacity: 70-80 kg/hour (Depending upon material) 5. Suitable for every types of plastic like: PET, LDPE, PVC, HDPE, PP, DS, EDS, ABS etc. It is also suitable for aluminium cans & glass bottles. ⮚ SPECIFIC DATA 1. Shredder Box Made Of High Grade Mild Steel.(Laser Cut) 2. Step Rotor System 3. Casting Parts: Pedestal, Loadwheel & Pulley 4. Hardox EN-8 Blades: 2 fix, 3 rotating 5. Heavy Duty Heavy C-Channel Structure 6. Voltage: 415, 3 Phase 7. Main Motor: AC Motor 7.5 HP 8. Hopper Loader: Jacketed M.S. Fabricated Hopper with sound proof design 9. Additional Feature: Safety hopper and Coupling cover. 10.Standard Electric panelling and wiring. 1. Extruder Base: The base us fabricated out of mild steel plates, Channels, The Top of the base is machined to mount hopper block and barrel support bracket. The AC induction motor and Helical Gearbox are accommodated on the base 2. Screw & Barrel: The screw and barrel are made from special alloy steel. Barrel and screw are nitride hardened, fine polished and chrome plated. The function of the screw is to carry the material from hopper to die with homogeneous melt. For precise control of temperature, the barrel is divided in to equivalent zones. Thermocouples fitted on the barrel and Pyrometers on control panel are for monitoring and controlling of the temperatures in each zone. Die zone is mounted on die head for precise control of temperature of die head. Watercooling jacket is provided in hopper block. Water circulation in the jacket is necessary, for the safety of thrust bearings. 3. In built Thrust housing helical gear box: It is constructed robustly from cast iron to hold the barrel horizontal. Barrel is fitted with heavy flange with high-tension bolt. It is having six bearings. One additional bearing is to withstand thrust pressure during extrusion. Seals are provided for restricting the entry of raw material in the gear box bearing housing. All Bearings are standard Make. 4. Main Drive: Ac motor with heavy-duty gearbox connected through V belt and sturdy coupling. 5. Cooling Tank: It is fabricated in SS Sheet. Sufficiently long and leak proof. Tray is mounted on stand guide rollers are provided to guide the strands traveling from the tray. 6. Palletizer: It is fabricated in M.S Sheet. Some Parts of body fabricated from S.S. sheet. 16 blades are running &1 blade is fix. Blade size is 6” (inch) .It is running with A.C. Elect. Motor with fully covered. 7. Control Panel: Construction of panel is in M.S. crc sheet. Panel is powder coated. All switchgears are of standard make voltmeter with voltage selector switch for incoming voltage. Temperature controllers with thermocouple, ammeter for each Zone. ⮚ SPECIFIC DATA: SCREW SIZE : 45 M.M L/D RATIO : 26:1 MATERIAL : En 41-B MADE PROCESS : Nitride polished special heat treatment 120 hr H.R.C 65~68º BARREL SIZE : 125 M.M MATERIAL : En-41-B MADE PROCESS : Nitride polished special heat BARREL HEATING ZONE : 4 Zone BARREL HEATING LOAD PER ZONE : 3 Kw DIE HEAD HEATING ZONE : 2 Zone DIE HEAD HEATING LOAD : 1 kw GEAR BOX : Helical MAIN DRIVE : 7.5 H.P A.C (Crompton /Hindustan/Bharat Bijlee Make) Motor with Ac Drive (Fuji Make) SS 304 WATER TANK : 2000 X 300 X 200 BLADE SIZE : 100 mm ROTATING BLADE : 12 nos. FIX BLADE : 1 no. ELECTRIC MOTOR : H.P A.C Motor (Crompton /Hindustan/Bharat Bijlee Make) PANEL BOARD : 7 zone POWER REQUIRED : 26 Kw (Approx.) PRODUCTION CAPACITY (KGS/Hr) Suitable for (ld/lldpe/hd/hdpe/pp/hips/pc Granules) : 60-70kg (Depend up on materials.10%+- POWER CONSUMPTION: Scrap grinder 3.75 kw Extruder main motor 5.6 kw Heating load on Barrel 12 kw
