Description
Product details
Techno-Commercial Scope for 1.5x1.5 Meter AUTOMATIC HOT & COLD COMBINED HYDRAULIC SHEET PRESS ⮚ DESIGN PARAMETERS WITH STANDARD SUPPLY: 1) 1500 x 1500 mm Aluminum base attached with plate heaters and whole supporting heavy duty structure: 1nos 2) Combined Dual Jack system for Hot & Cold Press. 3) Process Control Panel synchronized by one master control: 1 nos. ⮚ SPECIFIC DATA 1) Material to be processed: Recycled HDPE/PP/LDPE/PS/acrylic Grinded Scrap 2) Size to be manufactured: 150x150 cm Sheets 3) Output capacity: 12-15 sheets / Day (Depending upon material used) 4) Recommended Mold size: 1550 x 1550 mm Top & bottom plates and frame. 5) Max. Sheet Output: 1 sheet per hour max. 6) Advanced Temperature control panel with power saving technology. 7) Total Connected Load: 25* kW (Approx.) (3phase) 8) Integrated Hot & Cold Press Daylight System with Quad Jack Hydraulic System - 1 nos. ⮚ MAIN SHEET PRESS 1. Supporting structure MS Powder coated. 2. 10 mm Top & bottom aluminum plates. 3. 24 High Grade Cartridge heaters each side total 28 heaters mounted on aluminum plates to ensure equal distribution of heat. 4. 20 Ton standard Automatic Hydraulic Jack at the bottom of the pressing system with pressure gauge. 5. Standard 4 rolling mechanism to ensure smooth up-down rolling of bottom plate. ⮚ AUTOMATIC HYDRAULIC SYSTEM: 1. 10-50 Ton double stroke jack 2. Pressure Gauge monitoring system 3. Hand lever operated mechanism 4. Directional control valve 5. 2 HP Motor 6. Overload switch protection for motor 7. Pressure Pump 8. Oil tank – 60 Liter ⮚ PROCESS CONTROL PANEL: 1. Temp. Controllers: PID Controller with Auto tuning & dual display 2. MCB: Reputed make MCB in line with every heating zone supply 3. Other Electrical Outfits: Contactors, Synchronization card, standard cord wiring with PVC conduct channel framing. 4. Phase Synchronizer and Over Voltage Protection as per CE Standard. Techno-Commercial Scope for 1.5x1.5 Meter Cold Press System Cold Press system is an essential machine to cool down sheet under pressure to ensure a good quality for the sheet. After the heating process in hot press it is recommended to transfer mould to cold press. ⮚ DESIGN PARAMETERS WITH STANDARD SUPPLY: 1) 1500 x 1500 mm MS Plate base attached upward of the combined press. ⮚ MAIN SHEET PRESS 1. Size to be manufactured: 150x150 Cm Sheets 2. Supporting structure MS Powder coated. 3. 4 mm Top & bottom MS plates. 4. 20 Ton standard Manual Jack at the top of the pressing system with pressure gauge. 5. Standard 4 rolling mechanism to ensure smooth up-down rolling of bottom plate.
